RECORDING
Using Two VCRs for Copying and Editing Tapes
Use one VCR as the playback VCR and the other as the recording VCR.
1.Turn on the TV and VCRs.
2.Tune the TV to the VCR viewing channel (either 3, 4, or TV’s video input).
3.If you connected your VCR using the ANT.IN and RF OUT jacks, tune recording VCR to channel 3 or
If you connected your VCR using the AUDIO/VIDEO jacks, make sure you select the line input on the recording VCR.
4.Insert the tape you want to copy into the playback VCR. Insert a blank tape with safety tab in place into the recording VCR.
5.When you reach the point on the tape or program where you want to begin copying, press PLAY•PAUSE and then PLAY•PAUSE again on the playback VCR. You may need to adjust the tracking.
6.Press the RECORD button, then press PLAY•PAUSE, on the recording VCR.
7.Press the PLAY•PAUSE buttons on both VCRs at the same time to begin copying the tape.
8.To edit segments that you do not want to copy:
•Press PLAY•PAUSE on recording VCR to pause copying.
•Locate the next segment you want to copy on playback VCR by using FWD, REV, and PLAY•PAUSE, and then press PLAY•PAUSE.
•Press PLAY•PAUSE on both VCRs at the same time to resume copying.
9.Press STOP•EJECT on both VCRs when you are finished.
Caution:
The unauthorized recording of television programs or other copyrighted materials may infringe on the rights of others.
Two VCR Connection
CABLE BOX
IN
OUT OR ANTENNA
PLAYBACK VCR
ANT.IN
VIDEO AUDIO
IN
RF OUT
3 CH. 4 |
OUT |
OR
RECORDING VCR
ANT.IN
VIDEO | AUDIO |
IN |
|
RF OUT
3 CH. 4 |
OUT |
OR
TO TV | TO TV |
29
