Denon DN-2100F Main Features, 2CONNECTIONS/INSTALLATION, English, Table Of Contents, Accessories

ENGLISH

— TABLE OF CONTENTS —

z Main features	7
x Connections/Installation	7
c Part names and functions	8 ~ 10
v Compact discs	11
b Basic operation	12
n Pitch/Brake/Platter/Key adjust	13

m Seamless loop/Hot start/Stutter/
Digital scratch	14 ~ 16
, Other functions	17
. Preset functions and operations	18, 19
⁄0Cleaning the optical pick-up lens	20
⁄1Specifications	20

•ACCESSORIES

Check that the following parts are included in addition to the main unit:

q Operating instructions ……………………………………………1	e Remote control unit (RC-48) ………………………………………1
w Connection cords for signal output (RCA) ………………………2	r Remote control connection cable ………………………………1

1 MAIN FEATURES

The DN-2100F is a double CD player equipped with a variety of functions and high performance characteristics. Use it for example for DJ mixing and remixing.

Control section

1.The DN-2100F can be easily mounted on a standard 19-inch rack.

2.Improved visibility under low lighting conditions thanks to a large fluorescent display, back-lit illuminated action buttons and illuminated disc trays.

3.Improved interface operation thanks to a large jog/Shuttle wheel and track select knob.

Functions

1.Shockproof function protecting against external vibrations

2.Auto Level Search / Instant Start

3.Pitch Bend (Button & Jog)

4.Seamless Loop

Playback can be looped between any two points in a track without any break in the audio. Two loop start points (A-1 and A-2) can be set anywhere within the track or disc.

5.Hot Start / Stutter

Playback can be started instantaneously from points A-1 and A-2. In the stutter mode, these same buttons play momentary audio while pressed and held down.

6.Digital-Scratch

This exclusive function emulates vinyl turntable scratching in real time.

17. Brake / Plat-S

In Brake mode, the playing speed comes to a quick halt, simulating the STOP function on a vinyl turntable. In Plat-S mode, it simulates a vinyl turntable’s dragging sound when it’s power has been purposely turned OFF or ON.

18. Key Adjust

The key can be adjusted automatically when the playback pitch is changed so that the key (vocal) remains the same regardless of the pitch change.

19. Relay Play

When this mode is set, CD1 and CD2 starts playback alternately. This unit can relay the playback of CD1 and CD2 every track or every disc.

10.Power on Play

The player can be set so that playback in the relay mode starts when the power is turned on.

11.Fader Start

Up to 4 loaded Hot Starts can be triggered hands free with any compatible 5 volt pulse mixer by using the crossfader.

12.Auto Sleep Mode / Auto Disc Tray Close System

13.Preset functions - Different presets can be changed according to your needs.

14.EXTRA REMOTE

Wireless control is possible using the Denon RC-8000 and RC- 8001ST.

2CONNECTIONS/INSTALLATION

1.Turn off the POWER switch.

2.Connect the RCA pin cords to the inputs on your mixer.

3.Connect the control cord to the REMOTE connector on the RC-48.

CAUTION:

•Be sure to use the supplied control cord. Using another type of cable may result in damage.

•Be sure the power is off when connecting the control cord. Otherwise the units may not work properly.

•Never connect any remote controllers other than the RC-48. Doing so can damage the equipment.

15°

The DN-2100F will work normally when the player unit is mounted within 15 degrees off the vertical plane at the front panel. If the unit is tilted excessively, the disc may not be loaded or unloaded properly.

DN-2100F

7