Denon DN-2100F Seamless Loop/Hot Start/Stutter/Digital Scratch, Exiting a seamless looping, A1 B

ENGLISH

7

SEAMLESS LOOP/HOT START/STUTTER/DIGITAL SCRATCH

2LOOP/HOT START/STUTTER

★DN-2100F’s ASP (Audio Signal Processor) has two modes - seamless loop and digital scratch - that can be selected freely according to the purpose.

★Use this function to play the specified section between points A and B in a seamless loop (with no break in the sound).

★Two A points and one B point can be set.

★The data of the A points are also used for the hot starts and stutter functions.

2Digital scratch

• The jog wheel can be used to scratch with a feeling similar to when scratching with a vinyl turntable.

(1)SEAMLESS LOOP/HOT START/ STUTTER Starting seamless loop playback

★This can be operated when the seamless loop mode is selected in the preset mode.

1Start playback.

Press the PLAY/PAUSE button.

Load the start point (A).

Press the A-1 (or A-2) button.

A

1	2		A1 B		A2 B
		LOOP	Lit	or	Lit
			Lit		Lit
			1		2

Lit

•The seamless loop indicator is displayed as soon as point

2 A is set.

•The “ LOCK ” and “ LOADING ” indicator lights while the A point data is being loaded.

•The two “A” points can be set anywhere within the same

disc.

✽Data cannot be loaded for both A1 and A2 at the same time.

✽Depending on the conditions, it may not be possible to load points A1 and A2.

Set the end point (B).

Press the B-LOOP button.

	B LOOP
	A1 B	or	A2 B
	Lit		Lit
Start point	End point
	When the end point (B) is set, the
	disc is played from the start point
	(A) with no break.
	Point B is selected with respect
Start point	End point to point A for which the “ A * ”
3	indicator is lit.
	After this, the disc is played from
	the start point (A) to the end point

(B) with no break.

Seamless loop

•If the B-LOOP button is pressed again after the B point has been set, the B point is reset (moves). This allows you to make your seamless Loop shorter or longer “on the fly”.

•Whenever the A-1 (or A-2) button is pressed while in the seamless loop mode, playback starts over from the A point.

•When point B is set for point A-1 and the A-2 button is pressed, point B is cleared. In the same way, when point B is set for point A-2 and the A-1 button is pressed, point B is cleared.

Exiting a seamless looping

Press the EXIT/RELOOP button during seamless looping. (EXIT mode)

		Flashing	Lit
EXIT/	EXIT	EXIT
RELOOP
4	Start point	End point

•When the end point of (B) is reached, playback continues seamlessly, from that point onward.

Re-entering a seamless loop

Press the EXIT/RELOOP button to seamlessly jump back into your A-B loop during playback of the same track or disc. When the B-LOOP button is pressed, that point is now set as the new loop end point (B).

B LOOP

EXIT/

RELOOP

5

End point

Start point

Press the EXIT/RELOOP or B-LOOP button.

•Playback returns to the start point (A) and seamless looping resumes.

14