Uniden DSS8955+3, DSS8955+2, DSS8955+1 manual When you have this, Problem Try

When you have this	• Changing the handset to base code (see page 57).		Troubleshooting
problem...		Try...
	• Checking to see that there are not two handsets already using the conference
	feature (see page 37).
I can’t join the conversation.	• Checking to see that another handset is not in privacy mode (see page 39).
	• Making sure that you have registered all handsets (see page 12).
The answering system does	• Checking the AC adapter connection (see page 7).
not work.	• Checking to see if the answering system is turned on (see page 46).
	• The memory may be full. Delete some or all of the saved messages (see page
The answering system does	47).
not record any messages.	• Checking to see that the message record time is not set to announce only (see
	page 44).
The answering system
doesn’t say what time	• Checking to see if you have set the time (see page 44).
messages were recorded.
Messages are incomplete.	• The incoming messages may be too long. Ask callers to leave a brief message.
	• The memory may be full. Delete some or all of the saved messages (see page 47).
I can’t hear base or handset	• Adjusting the speaker volume on the base or handset (see page 36).
speaker during call screening
	• Checking to see if the call screen feature is set to on (see page 45).
or message playback.
I can’t access answering	• Checking to see if you are using the correct PIN number (see page 48).
system from a remote	• Checking to see if the touch-tone phone you’re using can transmit the tone for at
phone.	least two seconds. If it cannot, try using a different touch-tone phone.

54

DSS8955 OM.indb 54

28/7/08 5:21:05 PM