Basic Setup
Name Tag
Name Tagging works with the caller display number from Caller ID. You will need to subscribe to the Caller ID feature with your phone company for Name Tagging to work.
When the phone rings, the received caller display number is compared to numbers stored in the phonebook. If there is a match then any name stored with the phonebook number will be displayed. To change the Name Tagging setting, follow the steps listed below.:
1)Press [menu/select].
2)Select the HANDSET SETUP menu, and then the NAME TAG submenu.
3)Move the cursor to select ON or OFF.
4)Press [menu/select]. You will hear a confirmation tone.
Insert 0
This feature adds “0” or “00” at the beginning of the number received from Caller ID. The default setting for New Zealand is ON. The default setting for Australia is OFF. To change the Insert 0 setting, follow the steps listed below..
1) Press [menu/select].
2) Select the GLOBAL SETUP menu, and then the INSERT 0 submenu.
3) Move the cursor to select ON or OFF.
4)Press [menu/select]. You will hear a confirmation tone.
23
DSS8955 OM.indb 23
28/7/08 5:20:50 PM
