| 1.0 | Notice |
|
|
|
1.0 Notice
These instructions cover the installation of the Bosch Security Systems, Inc.
Install, test and maintain the
NFPA 72 requires a complete
These instructions contain procedures to follow in order to avoid personal injury and damage to equipment.
2.0 Device Description
The
Figure 1: |
| |
| SILENCED | TROUBLE |
| ALARM | SUPERVISORY |
|
| FIRE SYSTEM ANNUNCIATOR |
|
| LOCK |
|
| UNLOCK |
3.0 Installing the Reference Card
A
Install the reference card before securing the keypad.
Figure 2: Reference Card Installation
2 | |
| |
1 |
|
Slide reference guide between keypad holding tabs.
1 - Reference Card Stopper Tabs
2 - Holding Tabs
4.0 Mounting the FMR-7036
The keypad should be mounted no higher than shoulder height of the shortest person using the system.
Remove the keypad’s cover.
Insert a small flathead screwdriver in each slot at the bottom of the base. Press up, and pull the cover off.
4.1Surface Mounting
Use the base as a template to mark the location of the mounting holes (refer to Figure 3 on page 4 for mounting hole location).
Provide an opening in the mounting surface for the wiring.
Do not secure the base at this point.
4.2Electrical Box Mounting
Refer to Figure 3 on page 4 for the location of the mounting holes.
Bosch Security Systems, Inc. 9/08 | 3 |