Advanced Programming and Troubleshooting

Certain features remain hidden and can only be accessed using special key presses. Read this section if you want to:

Change the display to U.S. Standard or Metric

View the odometer

Display the number of hours you have used your EFX

View the software versions and hardware part numbers

Check the error log

Advanced Programming Tips

Always start at the scrolling Precor banner.

The advanced programming and diagnostic mode is accessed by pressing the RESET key while the Precor banner is scrolling. The remaining key presses must occur quickly and without pause.

The function of the QUICKSTART key is disabled while in diagnostics mode.

Use the SELECT and arrow keys while in the diagnostics mode.

Exit the diagnostics mode by pressing the RESET key for two or more seconds. The display remains blank for one second and any additional key presses are ignored.

Owner’s Manual: Advanced Programming and Troubleshooting

33

Page 35
Image 35
Precor 5.19, 5.17i, 5.21i manual Advanced Programming and Troubleshooting, Advanced Programming Tips