Owner’s Manual: Display Console 13
Display Console
Center display: When you begin a
program, the program profile displays
and remains until the scanning process
is initiated.
SmartRate display: LEDs light in
this column when the SmartRate
feature is activated.
SELECT key: Enter data during
the setup phase and customize
the display during a workout.
Keypad: Use the keypad to:
• Control your workout session
• Answer prompts prior to starting a program
• Determine which display features appear
• Prematurely end a program
• Adjust the resistance or ramp incline
(moveable ramp units only)
CrossRamp label: Targe t
specific muscle groups by
setting the ramp incline within
the number range shown.
LEDs: Light and clarify what
appears on the display.
SCAN LED: When lit, the scan feature is active and
information on the center display cycles through the
highlighted features (PROFILE, TIME, and so on). Refer to
Changing the Display Features Using the SELECT Key.