CROSSRAMP ▲ ▼ (EFX5.17i and EFX5.21i):
Press and hold the CROSSRAMP arrows to increase or decrease the ramp incline from 1 to 14.
Changes to the ramp incline are not immediate. It takes time for the lift to reach the target incline shown on the display.
Table 2 shows the degree of incline for each
CrossRamp setting.
Column height
Incline Setting
13 to 14
11 to 12
9 to 10
7 to 8
5 to 6
4 to 5
1 to 2
Table 2. Incline movement
Unit | Incline Setting | Degree of Incline |
|
|
|
EFX517i | 1 through 14 | 12° through 25° |
|
|
|
EFX521i | 1 through 14 | 13° through 30° |
|
|
|
EFX519 | Stationary | Fixed at 20° |
|
|
|
Important: Ramp changes occur only when the foot pedals are in motion. The number that appears on the display indicates the selected range, not the degree of incline. There is not a
The incline setting affects the column height in the program profile as shown in Diagram 7.
Diagram 7: Column height affected by changes in incline
Note: During the setup phase, pressing the CrossRamp arrow keys will not affect the ramp incline. However, the arrow keys do affect what appears on the display. Refer to Selecting a Program.
Owner’s Manual: Display Console | 18 |
