Precor Comprehensive Guide for EFX Assembly and Service Support

Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly instructions. If you do not assemble the EFX according to these guidelines, you could void the Precor Limited Warranty.

Obtaining Service

You should not attempt to service the EFX except for maintenance tasks described in the owner’s manual. For information about product operation or service, refer to the Precor web site at www.precor.com or call Precor Customer Support at 1-800-347-4404. If any items are missing, contact the dealer from whom you purchased the unit or call 1-800-4-PRECOR for the dealer nearest you.

Unpacking the Equipment

is shipped in one box. Ask for help form two or more people to unpack and assemble the EFX.

Required Tools

•Wire tie cutter

•Phillips-head screwdriver

•Two ⁹⁄₁₆-inch combination wrenches (open-end and box)

•SAE Standard socket set with socket extension

•Rubber mallet

Installation Requirements

Follow these installation requirements when assembling the unit:

•Assemble the unit near the location where you plan to use it. Provide ample space around the unit.

Set up the unit on a solid, flat surface.

Open the box and assemble the components in the sequence presented in this guide.

Leave room for adjustments.

but leave room for adjustments. Do not fully tighten fasteners until instructed to do so.

EFX5.17i Elliptical Fitness Trainer Assembly Guide 2