Owner’s Manual: Advanced Programming and Troubleshooting 37
Troubleshooting Heart Rate
Table6 may help you understand and troubleshoot erratic
heart rate readings.
Important: A heart rate can only be detected when the Precor
heart rate receiver is properly installed in the display and the
EFX is turned ON. You must also wear the chest strap.
Table 6. Erratic heart rate readings Note: To conduct electrical impulses from a user’s heart, the
electrode strips on the chest strap must be in contact with
the user’s skin. Usually, the concentration of salts in a
person’s perspiration provides enough conductivity to
transmit a signal to the receiver in the display console.
However, because of body chemistry or erratic heartbeats,
some people cannot use the heart rate feature.
What appears
on the display Cause What to Do
Nothing The heart rate
receiver is not
installed or it
has been
disconnected.
To purchase the heart
rate option or receive
Customer Support,
refer to Obtaining
Service.
— — — A heart rate is
not detected.
Be sure the heart rate
receiver is installed
properly and that the
chest strap is moist,
centered, and in direct
contact with your skin.
Pulsing HR LED The LED lights
briefly when a
heart beat is
detected.
If the LED is pulsating,
it indicates that the
heart rate equipment is
working properly.
What appears
on the display Cause What to Do