adjuster into the base. Wrench tighten the nut.

Remove the packing material.

Clean the ramp with a soft cloth dampened in a diluted solution of mild soap and water.

Level the EFX.

Before exercising, make sure the EFX does not wobble from side to side or front to back. Ask a capable person for help to make adjustments.

adjusting the rear pads can help, but will not compensate for extremely uneven surfaces.

1.To remove any side-to-side movement, rotate the rear pads.

2.To counteract any front-to-back rocking motion, ask your assistant to

grasp the upper handrails and raise the front of the unit off the floor. Use a crescent or combination wrench to loosen the nut on the height adjuster.

Turn the height adjuster

to raise the height of the front end.

• Turn the height adjuster

to lower the

height.

Once you have the proper height adjustment, use the wrench to turn the nut counterclockwise and tighten it securely against the base tube.

3. Have your assistant carefully lower the unit to the floor.

6

Page 56
Image 56
Precor 5.19, 5.17i, 5.21i manual To remove any side-to-side movement, rotate the rear pads