N-Tron 9000 Image Loader Commands, TFTP Commands, Download Image through COM port, eg.1, eg.2

Image Loader Commands

Download Image through COM port

Command Name	image download
Description	To download new firmware image through the serial port on the switch.
Syntax	image download
Parameters	None
Examples	N-TRON/Admin#[1]> image download
NOTES	Uses XModem protocol when transferring the file. N-Tron recommends
	that you use TFTP or FTP when updating the firmware. TFTP and FTP
	are both much faster.

TFTP Commands

Set the TFTP configuration parameter

Command Name	tftp set
Description	To set the TFTP configuration parameters TFTP Server IP Address and
	Remote File name.
Syntax	tftp set serverparam <ip-address> <remote-file-name>
Parameters	ip-address
	TFTP Server IP Address in dotted decimal notation for
	establishing the connection to transfer the file.
	remote-file-name
	Name of the remote file (including complete path) to be retrieved
	from the TFTP Server.
Examples	eg.1
	N-TRON/Admin#[1]> tftp set serverparam 10.1.1.151
	flash
	eg.2
	N-TRON/Admin#[1]> tftp set serverparam 10.1.1.151
	/usr/local/tftp/flash
NOTES	Please ensure that TFTP ServerIP is a valid IP Address by pinging it.
Show TFTP configuration parameters
Command Name	tftp show
Description	To display the present values of all the TFTP related configuration
	parameters.
Syntax	tftp show
Parameters	None
Examples	N-TRON/Admin#[1]> tftp show
NOTES	Displays the Server IP Address and Filename.
Download file from TFTP server
Command Name	tftp action get
Description	To download a specified file from the TFTP server.
Syntax	tftp action get
Parameters	None
Examples	N-TRON/Admin#[1]> tftp action get
NOTES	Check whether the server is up or not
	Check that the connection is established.
	Check if the file exists or not.
	Check the number of bytes downloaded

(Revised 2010-7-2) page 105 of 145