N-Tron 9000 user manual Show Igmp rfilter mode, Set Igmp rfilter mode

Show IGMP rfilter mode

Command Name	igmp show rfilter
Description	The igmp show rfilter command is used to display the rfilter status by
	port(s).
Syntax	Usage: igmp show rfilter <allport-list>
Parameters	port-listall
	Enter a specific port number list or specify all ports
Examples	N-TRON/Admin#[22]> igmp show rfilter all
	N-TRON/Admin#[22]igmp/show> igmp show rfilter 5
	Port No.	IGMP RFilter
	----------------------------
	5	DISABLE
	N-TRON/Admin#[6]igmp/show> igmp show rfilter 5-7
	Port No.	IGMP RFilter
	----------------------------
	5	DISABLE
	6	DISABLE
	7	DISABLE
	N-TRON/Admin#[7]igmp/show>
NOTES	Default: enable
Set IGMP rfilter mode
Command Name	igmp set rfilter
Description	The igmp set rfilter command is used to enable or disable rfilter based on a
	port-range.
Syntax	Usage: igmp set rfilter <enabledisable> <port-listall>
Parameters	enabledisable
	Enable or Disable the filter on the specified port.
	port-listall
	Enter a specific port number list or specify all ports
Examples	N-TRON/Admin#[35]igmp/set> igmp set rfilter enable 5
	IGMP RFilter enabled for port 5.
	N-TRON/Admin#[36]igmp/set>
NOTES	Default: enable

(Revised 2010-7-2) page 128 of 145