N-Tron 9000 Broadcast Packet Count Limit Commands, Set the Broadcast Packet Count Limit

Broadcast Packet Count Limit Commands

Get the Broadcast Packet Count Limit for one port

Command Name	broadcast get percentage
Description	Displays the broadcast packet percentage for a particular port.
Syntax	broadcast get percentage <port-number>
Parameters	port-number
	The port number must range between 1 and the maximum port number
	in the switch.
Examples	N-TRON/Admin#[1]> broadcast get percentage 6
	The BPCL for port number 6 is : 100
NOTES
Get the Broadcast Packet Count Limit for all ports
Command Name	broadcast show percentage
Description	Displays the broadcast packet percentage for all ports.
Syntax	broadcast show percentage
Parameters	None
Examples	N-TRON/Admin#[1]> broadcast show percentage
	Broadcast Percentage Value for Ports
	Port #	1	:	100	Port # 14 :	100
	Port #	2	:	100	Port # 15 :	100
	Port #	3	:	100	Port # 16 :	100
	Port #	4	:	100	Port # 17 :	100
	Port #	5	:	100	Port # 18 :	100
	Port #	6	:	100	Port # 19 :	100
	Port #	7	:	100	Port # 20 :	100
	Port #	8	:	100	Port # 21 :	100
	Port #	9	:	100	Port # 22 :	100
	Port # 10 :			100	Port # 23 :	100
	Port # 11 :			100	Port # 24 :	100
	Port # 12 :			100	Port # 25 :	100
	Port # 13 :			100	Port # 26 :	100
NOTES	These are egress filters.
Set the Broadcast Packet Count Limit
Command Name	broadcast set percentage
Description	Sets the broadcast packet percentage for a particular port
Syntax	broadcast set percentage <port-number> <%>
Parameters	port-number
	The port number must range between 1 and the maximum port number
	in the switch.
	%
	The count limit should be in the range 0 to 100 and represents the
	percentage.
Examples	N-TRON/Admin#[1]> broadcast set percentage 4 100
NOTES	Default is 3.

(Revised 2010-7-2) page 139 of 145