N-Tron 9000 Set Rstp Bridge Priority, Get Rstp Bridge Priority, Set Rstp Port Path Cost

Set RSTP Bridge Priority

Command Name	rstp set bridgepriority
Description	Sets the Bridge Priority. The root bridge on the network will be the one
	with the lowest bridge priority, or the lowest MAC address if the priorities
	are the same (as per IEEE 802.1D specification).
Syntax	rstp set bridgepriority <vlan-id> <bridge priority>
Parameters	vlan-id
	Vlan Id for which the priority to be set.
	bridge priority
	Priority of the Bridge to be set.
	The value should range between 0 and 65535. (as per IEEE 802.1D
	specification)
Examples	N-TRON/Admin#[1]> rstp set bridgepriority 1 1000
	N-TRON/Admin#[2]> rstp set bridgepriority 2 2000
NOTES	Ensure to use a valid range of Bridge priority and Vlan Index (being greater
	than zero)
Get RSTP Bridge Priority
Command Name	rstp get bridgepriority
Description	Gets the Bridge Priority of the given Vlan-Id.
Syntax	rstp get bridgepriority <vlan-id>
Parameters	vlan-id
	Vlan Id for which the priority is to be viewed .
Examples	N-TRON/Admin#[1]> rstp get bridgepriority 1
	N-TRON/Admin#[2]> rstp get bridgepriority 2
NOTES
Set RSTP Port Path Cost
Command Name	rstp set portpathcost
Description	To set the port path cost for a given port in the given vlan id. STP and
	RSTP use the path cost to determine which path to use when there are 2 or
	more available paths that both have the same port priority.
Syntax	rstp set portpathcost <vlan-id> <port no> <pathcost>
Parameters	vlan-id
	Vlan Id for which the pathcost is to be set.
	port no
	The portnumber for which the path cost is to be set.
	pathcost
	The path cost value to be set (1-200000000).
Examples	N-TRON/Admin#[1]> rstp set portpathcost 1 4 100
	N-TRON/Admin#[2]> rstp set portpathcost 2 6 200
NOTES	Please supply a valid Vlan Index (being greater than zero), a valid Port
	Number, and a valid path cost.
Get RSTP Port Path Cost
Command Name	rstp get portpathcost
Description	To get the port path cost for a given port in the given vlan id
Syntax	rstp get portpathcost <vlan-id> <port no>
Parameters	vlan-id
	Vlan Id to which the port belongs.
	port no
	The portnumber for which the path cost is to be viewed.
Examples	N-TRON/Admin#[1]> rstp get port pathcost 1 4
	N-TRON/Admin#[2]> rstp get port pathcost 2 6
NOTES	Please supply a valid Vlan Index (being greater than zero)and Port Number

(Revised 2010-7-2) page 137 of 145