N-Tron 9000 user manual Show Link Utilization, Get Flow Control, Get Name, Get State Of Priority

Show Link Utilization

Command Name	port show linkutilization
Description	Shows the utilization statistics for all the ports including %bandwidth, %in,
	%out, RX bytes, and TX bytes for each port.
Syntax	port show linkutilization
Parameters	None
Examples	N-TRON/Admin#[1]> port show linkutilization
NOTES	%Bandwidth is the %in or %out value that is higher, not the average value.
Get Flow Control
Command Name	port get flowcontrol
Description	Displays the current flow control settings on a given port.
Syntax	port get flowcontrol <port-no>
Parameters	port-no
	port number (1 ~ 24)
Examples	N-TRON/Admin#[1]> port get flowcontrol 6
NOTES	Check whether port-nois in the valid range. (1 ~ 24)
Get Name
Command Name	port get name
Description	Displays the name of a given port.
Syntax	port get name <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get name 6
NOTES	Check whether port-nois in the valid range. (1 ~ 26)
Get State Of Priority
Command Name	port get stateofpriority
Description	Displays the priority state of a given port number.
Syntax	port get stateofpriority <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get stateofpriority 6
	Priority State of Port[6] is : [disabled]
NOTES	Check whether port-nois in the valid range. (1 ~ 26)
Get Intruder State
Command Name	port get intruderstate
Description	Displays whether the intruder log is enabled or disabled.
Syntax	port get intruderstate
Parameters	None
Examples	N-TRON/Admin#[1]> port get intruderstate
	Intruder Log : Disabled
NOTES
Get Priority Level
Command Name	port get prioritylevel
Description	Displays the priority level on a given port.
Syntax	port get prioritylevel <port-no>
Parameters	port-no
	port number (1 ~ 26)
Examples	N-TRON/Admin#[1]> port get prioritylevel 6
	Priority Level of Port[6] is : [1]
NOTES	Check whether port-nois in the valid range. (1 ~ 26)

(Revised 2010-7-2) page 113 of 145