
Set System Location
Command Name | system set syslocation |
|
Description | To set the location details of the system | |
Syntax | system set syslocation | |
Parameters |
| |
| The details of where the system is located | |
Example | ||
| ||
Notes | Please ensure to use “ “ for supplying arguments with spaces | |
Get System Uptime |
|
|
Command Name | system get sysuptime |
|
Description | To get the uptime of the device. | |
Syntax | system get sysuptime |
|
Parameters | None |
|
Example | ||
| System Up Time | : 9 days:17 hours:8 mins:40 secs |
Notes |
|
|
Get Number of Ports present in the System |
| |
Command Name | system get portcount |
|
Description | To get the number of ports present in the device. | |
Syntax | system get portcount |
|
Parameters | None |
|
Example | ||
Notes |
|
|
Set IP Address of an SNMP Management Stations |
| |
Command Name | system set snmpmgmtip | |
Description | To set the IP address of an SNMP management station | |
Syntax | system set snmpmgmtip | |
Parameters |
| |
| The SNMP management station number | |
|
|
|
| The IP address of the SNMP management station in dotted decimal | |
| notation |
|
Example | ||
| ||
NOTES | The IP address should be a valid IP address (excluding Class D & Class | |
| E type). To restore a Station Trap to “Value Not Configured”, enter | |
| „0.0.0.0‟. |
|
Set SNMP Get Community name |
| |
Command Name | system set snmpgetcommunity | |
Description | To set the community name for performing snmpget operation | |
Syntax | system set snmpgetcommunity | |
Parameters |
|
|
| The name of the community to be used for performing snmpget | |
| operation |
|
Example | ||
| ||
| Systems” |
|
Notes | Please ensure to use “ “ for supplying arguments with spaces |
(Revised | page 100 of 145 |