N-Tron 9000 user manual Set Snmp Set Community name, Set Snmp Trap Community name

Set SNMP Set Community name

Command Name	system set snmpsetcommunity
Description	To set the community name for performing snmpset operation
Syntax	system set snmpsetcommunity <Community-Name>
Parameters	Community-Name
	The name of the community to be used for performing snmpset
	operation
Example	N-TRON/Admin#[1]> system set snmpsetcommunity private
	N-TRON/Admin#[1]> system set snmpsetcommunity “N-
	Tron_Systems”
Notes	Arguments cannot have spaces. You can use an underscore („_‟) instead
	of a space.
Set SNMP Trap Community name
Command Name	system set snmptrapcommunity
Description	To set the community name for raising snmp trap
Syntax	system set snmptrapcommunity <Community-Name>
Parameters	Community-Name
	The name of the community to be used for raising snmp trap
Example	N-TRON/Admin#[1]> system set snmptrapcommunity private
	N-TRON/Admin#[1]> system		set snmptrapcommunity “N-
	Tron_Systems”
Notes	Arguments cannot have spaces. You can use an underscore („_‟) instead of
	a space.
Show all configuration parameters
Command Name	system show config
Description	Displays the software version, the MAC address, status of gigabit ports,
	and other switch information
Syntax	system show config
Parameters	None
Example	N-TRON/Admin#[32]system/show> system show config
	System Configuration	:
	Product Configuration	: 9002CPU
	Software Version	: 4.1.1
	MAC Address	: 00:07:af:ff:d8:80
	IP Configuration Mode	: manual
	System IP Address	: 192.168.1.220
	Subnet Mask	: 255.255.255.0
	Gateway Address	: 192.168.1.1
	System Name	: N-TRON Switch
	System Contact	: N-TRON Admin
	System Location	: Mobile, AL 36609
	System Up Time	: 0 days:0 hours:55 mins:59 secs
	Total Number of Ports	: 26
	Port # 1 – 24	: 10/100 Mbps Copper and/or 100
			Mbps Fiber
	Port # 25	: 1000 Base LX Transceiver
	Port # 26	: 1000 Base LX Transceiver
Notes

(Revised 2010-7-2) page 101 of 145