Appendix B Using BOOT Loader
272 Avaya M770 ATM Switch User’s Guide
hardware functional group.
Command hierarchy
The hierarchy of the commands in the BOOT Loader command-line interface can be
obtained at any time by typing tree
Note: Certain functional groups in the hierarchy are also commands on their own.
Conventions used to describe commands
Throughout this chapter the following conventions are used:
• All command examples are given in relation to the root of the hierarchy. That is,
this is how you would enter the command if you were at the root of the
hierarchy.
• The syntax of commands are described using the symbols displayed in Table
3.2, on page 24.
Using the on-line help
On-line help is always available and can be obtained at any time by typing help .
The following information will be displayed:
• All commands and functional groups available at the current position in the
hierarchy, in alphabetical order.
• The universal commands. These are commands that are independent of the
hierarchy. They can be executed irrespective of where you are in the hierarchy.
The help output from the root is shown below.
Command: M15-155s8:/>help
Output: Commands:-
flash --- Flash management
commands
hardware --- Hardware commands
system --- System wide commands
terminal --- Terminal settings
version --- Display build version
number
Universal commands:-
exit, help, retstatus, top, up