Chapter 14 Managing the LECS
Avaya M770 ATM Switch User’s Guide 197
Specified ELAN Defaults in the LECS
Viewing default ELANs
When a LEC contacts the LECS, it usually specifies the ELAN name or the ELAN
type that it wants to join. You can define up to 64 different ELAN names in an M770
ATM Switch LECS.
You can define default ELANs for switches hosting a local LECS. These are the
ELANs that a LEC should join if it only specifies the ELAN type and not the name of
an ELAN.
In cases where the LEC has not specified the ELAN name or the ELAN type, you
can set up a default ELAN that will be used.
The following default ELAN names are defined in a M770 ATM Switch:
•an Ethernet type ELAN:“default”.
•an Unspecified type ELAN:“default”.
The ELAN name specified here will be used when a LEC does not provide the
ELAN name nor the ELAN type that it wants to join.
Note: You can only view and configure the defaults if you are using the local LECS
in the M770 ATM Switch or hosting a resilient LECS.
To display the default ELANs that have been specified in the LECS, use the lane
lecs default command:
To change the ELAN names for the default ELAN names, see “Specifying default
ELANs” on page 198.
Command: M15-155s8:/>lane lecs default
Output: No default Token Ring ELAN
Default Ethernet ELAN: default
Default ELAN for unspecified type: default