Chapter 16 Managing an ELAN
222 Avaya M770 ATM Switch User’s Guide
Deleting ELAN client mappings
To delete an ELAN client mapping, use the lane elan client delete
command:
Note: The above command does not affect clients that are already registered and
joined to the ELAN. If you want to make sure that any deleted clients are no longer
using the ELAN then you must restart the LES for the ELAN. If there are distributed
LES, you must restart each one that has distributed clients. Use the lane les
restart command. This will force all clients off the ELAN and all clients will have
to re-register.
Changing the Formula for LES address that a LEC will call
This command is only valid if the specified ELAN supports distributed LANE
Services. You need to change the ELAN autovers to distributed before you can
change the LES address that a LEC will call.
For information about the different LES address formulas that can be selected for a
distributed ELAN, see LEC Assigned for a Distributed ELAN in Chapter 13, “LANE
Services“.
Note: You must manually change the ELAN autovers to distributed in order to
execute the command. If the ELAN is in autosense and has learned that the
registration mode is distributed (displayed as “distributed*”), this command will
not be executed.
Command: M15-155s8:/>lane elan client delete <alias | atm | mac>
<id>
Example: M15-155s8:/>lane elan client delete mac 2
Parameters: <alias|atm|mac> Select which type of client mapping is to be deleted.
<id> This is the identifier for the mapping you wish to
delete.
Use the lane elan client show command to
display the identifiers for the mappings. For more
information about this command, see “Displaying
ELAN Client Mappings” earlier in this chapter.