Avaya M770 - page 131

Chapter 8 Permanent Virtual Connections (PVCs and PVPs)
Avaya M770 ATM Switch User’s Guide 111
Freeing a PVP connection
To free a PVP connection, use the pvp free command:
In order to free a PVP connection between 2 modules, you must type the command
in the CLI of each module.
Listing the current PVP connections
To list all current PVP connections which are set up on the M770 ATM Switch use
the pvp show command.
The pvp show command displays the information described in Table 8.3
Command: M15-155s8:/>pvp free <pvp-id>|all
Parameters: <pvp-id> The index of the PVP connection
all All configured PVPs.
Command: M15-155s8:/>pvp show
Output: PVP ID
|VPL1 | VPL 2 | FWD TD| REV TD| ADMIN
==================================================
===========
270047153
|9.1.7 | 6.3.7 | 1 | 1 | UP
Table 8.3 Output from the pvp show command
Field Description
ID Unique identifier for the PVP connection assigned by the switch
VPL1 One VPL for a PVP connection
VPL2 The second VPL for a PVP connection
FWD TD Traffic descriptor for the forwarding direction (from VPL1 to
VPL2)
REV TD Traffic descriptor for the reverse direction (VPL2 to VPL1)
Admin The management state of the PVP connection