Chapter 20 Signaling Security (Access Control) Commands
Avaya M770 ATM Switch User’s Guide 253
Displaying configured templates
Displaying a specific template's information:
Deleting a template
Command: M15-155s8:/>vport sig sigsecurity template show
Output: Template name: accept-all
Action: permit
Source NSAP/MASK: *
Destination NSAP/MASK: *
-----------------------------
Template name: block-r&d
Action: deny
Source NSAP/MASK: 39.03.00.00.00/*
Destination NSAP/MASK: *
-----------------------------
Template name: reject-1
Action: deny
Source NSAP/MASK: 39.30.20*
Destination NSAP/MASK: *
Command: M15-155s8:/>vport sig sigsecurity template show <name>
Example: M15-155s8:/>vport sig sigsecurity template show accept-all
Output: Template name: accept-all
Action: permit
Source NSAP/MASK: *
Destination NSAP/MASK: *
Associated filters:
-------------------
VPORT | PRIORITY | DIRECTION | STATE
========================================
9.1.0 | 16 | Incoming | On
9.1.0 | 16 | Outgoing | On
Command: M15-155s8:/> vport sig sigsecurity template remove <name>
Example: M15-155s8:/> vport sig sigsecurity template remove block-r&d