Chapter 20 Signaling Security (Access Control) Commands
Avaya M770 ATM Switch User’s Guide 251
Signaling Security State
Managing Signaling Security State
The entire switch's signaling security can be set to Enabled or Disabled mode. When
the switch is in the Disabled mode all configured security parameters have no effect
and calls are never rejected by the Signaling Security application. The commands for
managing the switch's security state are available only in the Master Agent (MA)
module.
Displaying Signaling Security State
Command: M15-155s8:/> vport sig sigsecurity disable
Command: M15-155s8:/> vport sig sigsecurity enable
Command: M15-155s8:/> vport sig sigsecurity show
Output: Current overall signaling-security configuration
================================================
The switch security access control is Enabled.
Configured templates:
---------------------
Template name: accept-all
Action: permit
Source NSAP/MASK: *
Destination NSAP/MASK: *
Template name: reject-1
Action: deny
Source NSAP/MASK: 39.30.20*
Destination NSAP/MASK: *
Total number of templates: 2
Configured filters:
--type q to quit or any other key to continue--
-------------------
PRIORITY | VPORT | STATE | INCOMING TEMPLATE | OUTGOING
TEMPLATE
==========================================================
==========
16 | 9.1.0 | ON | accept-all | *
16 | 9.1.0 | ON | * | accept-all
Total number of filters: 2
Secured vports list:
--------------------
9.1.0