Chapter 15 Managing the LES/BUS
208 Avaya M770 ATM Switch User’s Guide
Display ATM Forum compliant statistics for a BUS
To display the ATM Forum compliant statistics for a BUS, use the lane les
busstats command.
LANE 2.0 Capability
To display the LANE 2.0 capability of a LES you should type the following:
The on/off parameter shall be used when the LANE 2.0 capability has to be
changed.
Parameters: <elan-name> The name of the ELAN that currently hosts the distributed LES.
This parameter is case-sensitive.
Parameters: M15-155s8:/>lane les peer M770ElanEth
Peer LES ATM address LEC ID Range
39.84.0F.80.01.BC.61.DF.00.07.80.20.00.00.00.6F.07.80.20.01 1 - 1024
39.84.0F.80.01.BC.61.DF.00.07.80.20.00.00.00.6F.07.80.70.01 1025 - 2048
Command: M15-155s8:/>lane les busstats <elan-name>
Parameters: <elan-name> The ELAN name that hosts the BUS.
This parameter is case-sensitive.
Example: M15-155s8:/>lane les busstats default
Output: Number of frames discarded due to resource error0
Number of octets that this BUS has received413615667
Number of unicast data frames / control frames 591906
Number of multicast frames this BUS has received 1590697
Number of frames dropped by BUS due to time out 0
Number of unsuccessful multicast send connection attempts0
Number of unsuccessful multicast forward connection attempts 0
Command: M15-155s8:/>lane les lane2 <name> [on|off]
Parameters: <name> The name of the ELAN which hosts the LES.
Example: M15-155s8:/>lane les lane2 default
Output: LES-BUS 'default' has LUNI 2 capability Enabled