Chapter 10 Managing PNNI Routing
128 Avaya M770 ATM Switch User’s Guide
Global Topology PTSEs
The following command displays the database of PTSEs.
This command lists all the PTSEs in the local database. It organizes them by their
originator, and then according to their PTSE-ID (for the local node there is a
distinction between different slots originating PTSEs). In this table only summary
information about the PTSEs is presented, for more information about a specific
PTSE, use the optional <index> parameter in the command.
Command: M15-155s8:/>route pnni topology ptse [<index>]
Parameter: <index> - Index of specific ptse (0 for all)
This is optional parameter to show the ptse in full format
mode.
Example: M15-155s8:/>route pnni topology ptse
Output: Ptse table:
Orig
Node Id:
60.a0.39.84.0f.80.01.bc.61.de.81.00.00.40.00.00.00.6f.00.00.40
.00
Slot Index: 0
Index Ptse Id Type Seq NumLife TimeCheckSum
----- ------ --------------------------------------
--------
1 0x00000001 nodalInformation6696756137
2 0x02000003 internalReachableAddress10265655917
3 0x02000005 internalReachableAddress6696751421
Orig
Node Id:
60.a0.39.84.0f.80.01.bc.61.de.81.00.00.40.00.00.00.6f.00.00.40
.00
Slot Index: 3
Index Ptse Id Type Seq NumLife TimeCheckSum
----- ------ --------------------------------------
--------
4 0x34000008 horizontalLinks111056758
Orig
Node Id:
60.a0.39.84.0f.80.01.bc.61.de.81.00.00.40.00.00.00.6f.00.00.60
.00
Index Ptse Id Type Seq NumLife TimeCheckSum
----- ------ --------------------------------------
--------
5 0x00000001 nodalInformation211066922
6 0x02000003 internalReachableAddress1108416206
7 0x94000007 horizontalLinks111066918
Done!