Avaya M770 - page 266

Chapter 19 Upgrading Avaya M770 ATM Switch Software
246 Avaya M770 ATM Switch User’s Guide
Changing the main image
To change t he main ima ge that the M770 ATM Sw itch will ne xt run, use the flash
default command.
Note: This command checks the integrity of the selected image therefore it may take
a few seconds for the cursor to return.
Viewing the default boot loader image
To view the default boot loader image that the M770 ATM Switch will load, use
the flash loader command.
Changing the default boot loader image
To change the default boot loader image that the M770 ATM Switch will load, use
the flash loader command.
Note: This command checks the integrity of the selected image therefore it may take
a few seconds for the cursor to return.
Command: M15-155s8:/>flash default <filename>
Example M15-155s8:/>flash default m770ATM.1.2.0
Parameter: <filename> The name of th e image that the M770 ATM Switch will
next run.
Command: M15-155s8:/>flash loader
Output: The current flash loader boot loader is “boot_loader.1.2.5”
Command: M15-155s8:/>flash loader <filename>
Example: M15-155s8:/>flash loader boot_loader.1.2.7
Parameter: <filename> The name of the default boot loader image that the M770 ATM
Switch loads.