Avaya M770 - page 85

Chapter 6 Managing Virtual Ports
Avaya M770 ATM Switch User’s Guide 65
bandwidth assigned for a vport is 104268 CPS divided by 8. However, if we were
using PLCP, the default bandwidth would be 95990 CPS divided by 8.
Deleting a virtual port
To delete a virtual port, use the vport delete command.
Disabling a virtual port
Before any virtual port parameters can be changed or reset you will have to disable
the virtual port.
To disable a virtual port, use the vport disable command.
Enabling a virtual port
To enable a virtual port, use the vport enable command.
Command: M15-155s8:/>vport delete <vport id>
Example: M15-155s8:/>vport delete 8.1.4
Parameter: <vport id> The virtual port in the form <slot>.<port>.<virtualport
number>.
Command: M15-155s8:/>vport disable <vport id>
Example: M15-155s8:/>vport disable 8.1.0
Parameter: <vport id> The virtual port in the form <slot>.<port>.<virtualport number>.
Command: M15-155s8:/>vport enable <vport id>
Example: M15-155s8:/>vport enable 8.1.0
Parameter: <vport id> The virtual port in the form <slot>.<port>.<virtualport number>.