Chapter 19 Upgrading Avaya M770 ATM Switch Software
Avaya M770 ATM Switch User’s Guide 243
3 In order to download via TFTP, the remote file server must be accessible from
the ELAN to which the management LEC belongs or from the M-SPV/ M-SPX/
M-SPS Ethernet Sideband port. To verify this connectivity you should ping
from the file server to the IP of the LEC or to the IP of the M-SPV/ M-SPX/ M-
SPS. To download a software image over TFTP, use the system download
tftp command.
4 After downloading the new software version to all ATM modules in the M770
ATM switch, reboot the switch using the system reboot switch command to
run the new version.
Note: It is recommended that all modules in the M770 ATM switch use the same
software version. To check which software is currently running on the ATM
module, use the command version.
Command: M15-155s8:/>M770s8:/>system download tftp <ip_address>
<filename> [<gateway>]
Example: M15-155s8:/>M770s8:/>system download tftp 194.31.222.23
m770ATM.2.0.16
Parameters: <ip_address> The IP address of the remote TFTP server.
<filename> The full name of the file on the TFTP server.
If the file is contained in a sub-directory, the complete path
and filename must be supplied.
<gateway> The gateway through which you should perform the
download:
• lec - through the LANE Client
• mspv - through the M-SPV/ M-SPX/ M-SPS
(optional, default value: lec)