Chapter 5 Managing Physical Ports
40 Avaya M770 ATM Switch User’s Guide
To display information for all physical ports, enter the pport show command.
Note: In the Table above, Port 0 is the CPU port and Port 16 is the Backplane port.
Note: When you enter M4-DS3s8:/> pport show for the DS3 module you will see
all of the parameters displayed in the Table above, with information at the bottom
of the table for several additional Physical Port parameters displayed only for DS3
modules. See the Table below.
Command: M15-155s8:/>pport show
Output: Physical Port Information
Port Admin Oper Speed Framing VPI VPC VPI VCI
Id State State Kbps Mode Range Range
8.0 Up Up --- --- [0..0] [0..4095] [0..1023]
8.1 Up Down 155520 Sonet [0..7] --- [0..1023]
8.2 Up Down 155520 Sonet [0..7] --- [0..1023]
8.3 Up Down 155520 Sonet [0..7] --- [0..1023]
8.4 Up Down 155520 Sonet [0..7] --- [0..1023]
.
.
.
8.13 Up Down 155520 Sonet [0..7] --- [0..1023]
8.14 Up Down 155520 Sonet [0..7] --- [0..1023]
8.15 Up Down 155520 Sonet [0..7] --- [0..1023]
8.16 Up Down 155520 Sonet [0..7] --- [0..65535]
Port Cell Payload Media Media Last
Id Mode Scrambling Type Mode Change
8.0 Unassigned On --- UP ---
8.1 Unassigned On MMF LRDI 0:00:00:15.0
8.2 Unassigned On MMF UP 0:00:00:54.4
8.3 Unassigned On MMF LRDI 0:00:00:22.8
8.4 Unassigned On MMF UP 0:00:00:63.4
.
.
8.11 Unassigned On MMF UP 0:00:00:06.7
8.12 Unassigned On MMF UP 0:00:00:12.1
8.13 Unassigned On MMF UP 0:00:00:30.1
8.14 Unassigned On MMF UP 0:00:00:19.9
8.15 Unassigned On MMF UP 0:00:00:27.4
8.16 Unassigned Off --- --- ---