Chapter 6 Managing Virtual Ports
Avaya M770 ATM Switch User’s Guide 59
Listing the link configuration information for all virtual ports
You can view the link configuration information for all virtual ports on a module or
for a specific virtual port.
Any virtual port information that is marked with an asterisk (*) has been learned by
the M770 ATM Switch during the ILMI dialogue with the remote device.
Information that is not marked with an asterisk has either been configured by the
user or is the default setting for the virtual port.
To view the link configuration information about all virtual ports, use the
vport show config command.
The vport show config command displays the information described in Table
6.2.
Command: M15-155s8:/>vport show config [<vport id>]
Parameter: <vport
id> The virtual port.
This is displayed in the format <slot>.<port>.<virtualport number>
If a <virtual port number> parameter is not supplied then the link
configuration summary information is displayed for all virtual ports.
Example: M15-155s8:/>vport show config
Output: Virtual Port Configuration Information
VirtualAdmin OperILMIPollMultiStrictSig. SSCOPWait for
Port IdState StateEnabledModeRegAALRx. WindowPeer SSCOP
8.0.0 Up UpNo DisabledOnOffDefaultNo
8.1.0 Down DownYesNoneOn OffDefault No
8.2.0 Up UpYes Port + ESIOnOffDefaultNo
8.3.0 Up DownYesNoneOn OffDefault No
8.4.0 Down DownYesNoneOn OffDefault No
Table 6.2 Output from the vport show config command
Field Description
Virtual Port Id The virtual port. This is displayed in the format
<slot>.<port>.<virtualport number>.
Admin State The administrative state of the virtual port. If the state is UP
then this virtual port is enabled. If the state is DOWN then this
virtual port is disabled.
This will occur when you disable the virtual port using the
command-line interface or via Management.
Oper State The operational state of the virtual port. If the state is UP then
this virtual port is functional. If the state is DOWN then this
virtual port is not functional. This could be due to a problem
with ILMI or I LMI has been disabled due to a problem with the
physical connection.
ILMI Enabled Whether or not ILMI is enabled on the virtual port.