Avaya M770 - page 94

Chapter 6 Managing Virtual Ports
74 Avaya M770 ATM Switch User’s Guide
Note: You must disable the virtual port before you can change or reset any virtual
port parameters. For more information about how to disable a virtual port, see
“Disabling a virtual port” on page 65.
Setting the QSAAL wait parameter on a virtual port
This parameter changes this vport to wait indefinitely for an incoming QSAAL
connection. By default, this parameter is disabled.
To set the waitqsaal parameter on the virtual port use the vport set waitqsaal
command.
Note: You must disable the virtual port before you can change or reset any virtual
port parameters. For more information about how to disable a virtual port, see
“Disabling a virtual port” on page 65.
Command: M15-155s8:/>vport set waitqsaal <vport id> [on|off]
Example: M15-155s8:/>vport set waitqsaal 8.1.0 on
Parameters: <vport id> The virtual port in the form
<slot>.<port>.<virtualport number>.
[on|off] Turns waitqsaal parameter On or Off.