Chapter 15 Managing the LES/BUS
200 Avaya M770 ATM Switch User’s Guide
To create a new LES in the switch, use the lane les create command. For
definitions of the various LES modes, see “changing the LES registration mode”
later in this chapter.
Note: Each selector entered, when creating a LES, must be unique on the switch.
You can use the lane les show command to view a list of all selectors currently
in use. Selectors 7f, 80 and 81 are reserved for special use and cannot be used for the
LES or BUS.
Note: The LES name should be the same as the hosted ELAN name.
Note: Avaya strongly recommends that you use distributed LES/BUS services instead
of resilient.
Command: M15-155s8:/>lane les create <elan-name> <mode> <type> <les-selector> <bus-selector>
Example: M15-155s8:/>lane les create marketing_eth distributed ethernet 82 83
Parameters: <elan-name> Enter the name of the ELAN that the new LES will host. The ELAN
name should be unique within the ATM network. This parameter is
case-sensitive.
<mode> Enter the mode type as either “distributed”, “standby”, or “manual”.
See above explanation for correct mode usage.
distributed - automatic registration for distributed LESes.
standby - automatic registration with standby support.
manual - manual registration.
<type> Enter the type of LES ELAN as “ethernet”.
<les-
selector> Enter the 1 or 2 digit hexadecimal ATM selector for the LES.
<bus-
selector> Enter the 1 or 2 digit hexadecimal ATM selector for the associated BUS
functions.