Avaya M770 - page 168

Chapter 10 Managing PNNI Routing

148 Avaya M770 ATM Switch User’s Guide

Setting the PNNI interface administrative weight

Use the following command to set administrative weight to PNNI interfaces:

In the following example the user configures the Administered Weight for RtVBR

for interface 5124 to be 10000.

Set PNNI interfaces to default values

In order to set PNNI interfaces to default values, use the following command:

PNNI Levels

Showing PNNI Node Level

This command shows the level scopes as configured by the user for all nodes within

the switch.

Command: M15-155s8:/>route pnni config interfaces aggrToken <ifIndex>

Parameters: <ifIndex> -

<aggrToken> - Index number of the interface (or all)

Aggr Token value

Command: M15-155s8:/>route pnni config interfaces weight <ifIndex> <type>

<value>

Parameters: <ifIndex> - Index number of the interface (or all)

<type> - Cbr RtVbr NrtVbr Abr Ubr all

<value> - admin weight, range [1..16777216]

Notes: - ifIndex=all : all interfaces

type=all : all types

Examples: M15-155s8:/>route pnni config interfaces weight 5 124 RtVbr 10000

Command: M15-155s8:/>route pnni config interfaces default <ifIndex> <cos>

Parameters: <ifIndex> - Index number of the interface (or all)

<cos> - Cbr RtVbr NrtVbr Abr Ubr all

Notes: - ifIndex=all : all interfaces will get default parameters

- cos=all : all classes of service for this

interface will get default values.

Command: M15-155s8:/>route pnni config level show [<level>]

Output: Level Scope:

Level 1 - Configure [Current]: 56 [ 56 ]

Level 2 - 48

Level 3 - 40

Level 4 - 32

Level 4 - 24