Chapter 5 Managing Physical Ports
48 Avaya M770 ATM Switch User’s Guide
Displaying PLCP counter information for DS3 physical ports
You can view PLCP (Physical Layer Convergence Protocol) counter information for
physical ports on DS3 modules that have their mapping mode set to PLCP. To view
PLCP counter information use the command: pport show plcpcounters.
Note: The pport show plcpcounters command does not display PLCP
counter information for DS3 ports that have their mapping mode set to ADM.
To display DS3 counter information for all DS3 physical ports, enter the pport
show plcpcounters command.
The pport show counters command displays the information described in
Table 5.4.
Command: M4-DS3s8:/>pport show plcpcounters
Output: Physical port plcp counters
----------------------
Port
ID BIP FERR FEBE
8.1 0 0 0
8.2 0 0 0
8.3 0 0 0
8.4 0 0 0
Table 5.4 Output from the pport show plcpcounters command
Field Description
BIP Bit interleaved errors (B1).
FERR Framing Pattern Octet Errors and Path Overhead Identification
Octet Errors.
FEBE Far End Block Errors.