Avaya M770 - page 65

Chapter 5 Managing Physical Ports
Avaya M770 ATM Switch User’s Guide 45
Note: The pport show ds3counters command displays several parameters for
near end (ne) counter information (PESS, PSESS, LCVS, PCVS, LESS) that are not
displayed for far end (fe) counter information.
To display DS3 counter information for all near end DS3 physical ports for the
current interval, use the pport show ds3counters ne current command.
The pport show ds3counters ne current command displays the information
described in Table 5.3.
Command: M4-DS3s8:/>pport show ds3counters ne current
Output: Link near end current counters
----------------------
Port
ID PESS PSES SUASS LCVS PCVS LESS CCVS CESS CSES S
8.1 000000000
8.2 000000000
8.3 000000000
8.4 000000000
Table 5.3 Output from the pport ds3show ne current counters command
Field Description
Port Id The physical port. This is displayed in the format <slot>.<port>
PESS The number of P-bit errored seconds.
PSESS The number of P-bit severely errored seconds.
UASS The number of unavailable seconds.
LCVS The number of line coding variations.
PCVS The number of P-bit coding variations.
LESS The number of line errored seconds.
CCVS The number of C-bit coding violations.
CESS The number of C-bit errored seconds.
CSESS The number of C-bit severely errored seconds.