Chapter 14 Managing the LECS
192 Avaya M770 ATM Switch User’s Guide
To change the location and type of the local LECS, use the lane lecs location
local command:
Remote LECS
When creating or changing to a remote LECS:
• If a local LECS already exists on the switch then you are warned that it will be
deleted and the switch will look for a LECS at the specified remote address.
To change the location of the remote LECS, use the lane lecs remote command:
Note: Changing the LECS location may disrupt all LANE connections and any
change will take effect immediately.
Command: M15-155s8:/>lane lecs location local {wka | <selector>}[{simple | resilient}]
Parameters
:wka simple An active local simple LECS is created, using the WKA.
Remote clients that make requests for the WKA will be
routed to this LECS via PNNI.
<selector> simple An active simple LECS is created, using the modules
address with the specified selector.
wka resilient A resilient LECS is created.
This LECS will enter the election process and if elected will
be the “active LECS”. Remote clients that make requests
for the WKA will be routed to this LECS via PNNI.
<selector> resilient A resilient LECS is created, using the modules address with
the specified selector.
The created LECS will enter the election process and if
elected will be the active LECS. Modules that are
configured to use the elected resilient LECS will direct
clients to this LECS.
Command: M15-155s8:/>lane lecs location remote {elected | wka | <address>}
Parameters: remote elected Module will wait for notification via a proprietary protocol, of
the address of the elected resilient LECS.
wka Module will seek a remote LECS, that is advertising the WKA.
<address> Module will seek a remote LECS, that is advertising the
specific ATM address on the network.