Avaya M770 - page 295

Appendix B Using BOOT Loader
Avaya M770 ATM Switch User’s Guide 275
Changing the main image
To change the main image that the M770 ATM Switch will next run, use the flash
default command.
Note: This command checks the integrity of the selected image therefore it may take
a few seconds for the cursor to return.
Viewing the default boot loader image
To view the default boot loader image that the M770 ATM Switch will load, use
the flash loader command.
Changing the default boot loader image
To change the default boot loader image that the M770 ATM Switch will load, use
the flash loader command.
Note: This command checks the integrity of the selected image therefore it may take
a few seconds for the cursor to return.
Command: M15-155s8:/>flash default <filename>
Example M15-155s8:/>flash default m770ATM_new
Parameter: <filename> The name of the image that the M770 ATM Switch will
next run.
Command: M15-155s8:/>flash loader
Output: The current flash loader boot loader is
“boot_loader.1.2.5”
Command: M15-155s8:/>flash loader <filename>
Example: M15-155s8:/>flash loader boot_loader.1.2.7
Parameter: <filename> The name of the default boot loader image that the
M770 ATM Switch load.