OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND

STOPPING SAW

1.The on/off switch is located underneath the switch shield (A) Fig. 54. To turn the saw “ON,” move switch trigger (B) to the up position.

2.To turn the saw “OFF,” push down on switch shield

(A) Fig. 55.

LOCKING SWITCH IN

THE “OFF” POSITION

IMPORTANT: When the tool is not in use, the switch (B) Fig.56, should be locked in the OFF position using a padlock (C), with a 3/16" diameter shackle to prevent unauthorized use.

A

B

Fig. 54

A

Fig. 55

C

B

Fig. 56

19

Page 19
Image 19
Delta 36-650 instruction manual Operating Controls and Adjustments, Starting Stopping SAW, Locking Switch OFF Position