Chapter 17 Managing System Commands
234 Avaya M770 ATM Switch User’s Guide
Setting the number of lines
To set the number of lines, use the terminal lines command.
Viewing the terminal width
By default, the terminal width is set to 79.
To display the current terminal width, use the terminal width command.
Setting the terminal width
To set the terminal width, use the terminal width command.
Viewing the wordwrap status
To display the wordwrap status, use the terminal wordwrap command.
Setting the wordwrap
To set the wordwrap, use the wordwrap command.
Viewing the linewrap status
To display the linewrap status, use the terminal linewrap command.
Command: M15-155s8:/>terminal lines <rows>
Example: M15-155s8:/>terminal lines 48
Parameter: <rows> The number of lines to be displayed on the terminal.
Command: M15-155s8:/>terminal width
Output: terminal width 79 (auto-detected) or
(user-configured)
Command: M15-155s8:/>terminal width <columns>
Example: M15-155s8:/>terminal width 90
Parameter: <columns> The number of columns to be displayed
on the terminal.
Command: M15-155s8:/>terminal wordwrap
Output: wordwrapping enabled or
wordwrapping disabled
Command: M15-155s8:/>terminal wordwrap [on | enable | off |
disable]
Example: M15-155s8:/>terminal wordwrap enable
Command: M15-155s8:/>terminal linewrap
Output: no linewrapping