Avaya M770 - page 178

Chapter 10 Managing PNNI Routing

158 Avaya M770 ATM Switch User’s Guide

Remove the PNNI summary address prefix

To remove the PNNI summary address prefix use the following command.

Set the PNNI summary table to the default

Use the following command to set the PNNI summary table to its default values.

For lowest-level node it is the switch’s ATM prefixs. For higher-level nodes it’s the

switch prefix where its length in bits is equal to the level where it resides.

<type>

<level>

I(nternal) or

E(xterior)

The ATM

address prefix.

Each octes is in

hex and is

separated by a

“.”

length of the

prefix in bits (0-

152)

Internal level

number. 1 is

the lowest

(physical) node

<type>

<level>

Examples: disable I 39.84.0f.80.01.bc.61.de.81.00.00.60.00 104 1

Command: M15-155s8:/>route pnni config summary remove <type> <prefix> <len>

<level>

Parameters: <type> - I(nternal) or E(xterior)

<prefix> - The Atm address prefix

each octet is in hex and separate with '.'

<length> - length of the prefix in bits (0-152)

<level> – Internal level number. 1 is the lowest

(physical) node

Examples: set I 39.84.0f.80.01.bc.61.de.81.00.00.60.00 104 1

Command: M15-155s8:/>route pnni config summary default <level>