Chapter 7 Managing Module Hardware
100 Avaya M770 ATM Switch User’s Guide
Note: T least one VPI has to be reserved for the signalling VPC.
After the next reboot, the VPC VPI configuration would look like this::
At this point, the user can configure Permanent Virtual Paths (PVPs). For more
details about PVPs, please refer to Chapter 8, “Permanent Virtual Connections
(PVCs and PVPs)”.
Command: M15-155s8:/>hardware vpcvpirange
Output: Configured VPC VPI
range 6..7
Current VPC VPI range 6..7