Switching the displayed information
The display can show the disc title, track title and remaining time (recording time available when a recordable MD is loaded) information.
or
DISPLAY /CHARA
Number of tracks and total
playing time
When no track is selected (In Stop mode):
Press DISPLAY/CHARACTER on the main unit or the remote control unit. Each press of the button switches the displayed information as follows.
Number of tracks and |
| Number of tracks and |
total playing time |
| remaining recording time |
Disc title
•A disc title composed of more than 11 characters is scrolled, and the first 11 characters are displayed after scrolling.
•The display shows “NO TITLE” if the disc has no title assigned to it.
Number of tracks and remaining
recording time
Disc title
When a track has already been selected (During playback or in Stop mode):
Press DISPLAY/CHARACTER on the main unit or the remote control unit. Each press of the button switches the displayed information as follows.
Track No. and its playing time
Track title
•A track title composed of more than 11 characters is scrolled, and the first 11 characters are displayed after scrolling.
•The display shows “NO TITLE” if the track has no title assigned to it.
Program playback
You can program up to 32 tracks in any desired order including the same tracks.
•You can only make a program in Stop mode.
1Load an MD.
See “Normal playback ” on page 8.
2Select Program mode. Main unit:
Press PLAY MODE until “PROGRAM” is shown. Then, the PROGRAM indicator lights up.
Each time PLAY MODE is pressed, the play mode indicators switches as follows:
PROGRAMRANDOM Off (Continuous play)
PROGRAM
Remote control unit:
Press PROGRAM. The “PROGRAM” is shown and the PROGRAM indicator lights up.
To exit Program mode, press PROGRAM once again. Then, the PROGRAM indicator goes out.
The display shows the following for programming.
The first track
10