JVC XM-228BK manual Remote control unit, If you make a mistake in programming In Stop mode

or

CANCEL

or

or

PROGRAM

3Select desired track numbers to be programmed. Main unit:

1Turn the jog dial to the right or left to select the desired track number to be programmed. (Turning it to the right increases the track number and vice versa.) The selected track number will blink.

2Press SET.

The track number stays lit and the program number increases by 1. Also, the programmed track is indicated on the music calender.

Then, the total playing time is displayed instead of the program number.

Example)
Number of programmed tracks	Total playing time
The last programmed track	The last programmed track

3 Repeat steps 1 and 2 to select the other tracks for the program.

Remote control unit:

1Select the desired track number with the numeric keys.

The selected track number is programmed and the program number is displayed. Then, the total playing time is displayed instead of the program number.

To select a track, see “Selecting a track with the numeric keys” on page 9.

2Repeat step 1 to select the other tracks for the program.

4Press 6 on the main unit or 3 on the remote control unit.

Program playback starts in the programmed order.

•Program playback stops after having played all programmed tracks.

•To stop playing, press 7 on the main unit or the remote control unit.

•To skip the programmed track, turn the jog dial on the main unit to the right or left or press 4 or ¢on the remote control unit.

To check the programmed tracks and their order (In Stop mode):

Press 4or ¢on the remote control unit in Stop mode. The programmed tracks will be successively displayed in the programmed order. (The track title will be displayed before the track number, if it is written.)

If you make a mistake in programming (In Stop mode):

Press 7STOP/CANCEL on the main unit or CANCEL on the remote control unit in Stop mode to clear the last track. Each press of the button clears the last track in the program. Press the button repeatedly until the track you programmed by mistake is cleared and then re-program tracks from that point.

To exit Program Play mode (In Stop mode):

Main unit:

Press PLAY MODE in Stop mode to select any mode other than Program Play mode.

Remote control unit:

Press PROGRAM in Stop mode to light off the PROGRAM indicator.

The program contents remain in memory even after the unit has exited Program Play mode. Note: The program contents are cleared from memory when the power cord is unplugged

or in case of power failure.

11