Assigning a track title during playback or recording
or
ENTER
or
or
A track title up to 64 characters can be assigned as you play or record the track.
1Starts playback or recording the track.
2Press TITLE on the main unit once or press TITLE/EDIT on the remote control repeatedly until the title editing display appears.
The display is divided into the title name area and the characters area.
You can select a character to be input to the title name from the characters area. For the character to be input, see the “Character Layout Table” on page 26.
Blinks | Alternately blinks |
Title name area Characters area
3Input the track title name.
•Input the track title using the title editing buttons.
•For detailed description, refer to step 4 in “Assigning the disc title and track titles” on page 27.
However, note that the function of 7STOP/CANCEL differs. 7STOP/CANCEL acts to stop the MD.
4Press ENTER on the main unit or the remote control unit.
The display shows “EDITING” and the TOC indicator lights up.
Next, the display shows the disc title name and then shows the track number and the total playback time.
•If it is during playback, the track will be played repeatedly until ENTER is pressed. Pressing ENTER stops the playback.
•If it is during recording, recording continues even after ENTER is pressed.
If ENTER is not pressed until the end of the track, the characters input before the end of the track are recorded as a track title.
5Press 0 on the main unit or the remote control unit to eject the MD.
The data in the memory is written in the MD before it is ejected. The display shows “UTOCwriting” during MD write operation.
•Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. Otherwise the recording may be unplayable later.
•The data in the memory is written in the MD also when the unit is switched to Standby mode while “EDITING” is being displayed.
To exit editing:
Press TITLE on the main unit or TITLE/EDIT on the remote control unit before pressing ENTER in step 4.
29
