JVC XM-228BK To adjust the analog input level, 4Play the source to be recorded, To stop recording

DIGITAL 1

44.1kHz

or

or

3Select the input by pressing INPUT SELECTOR on the main unit.

Each press of INPUT SELECTOR switches the inputs as follows.

DIGITAL 1 IN DIGITAL 2 IN ANALOG IN

DIGITAL 1 IN: Select this to record the digital input from the digital source component connected to the DIGITAL IN 1 optical jack. The DIGITAL 1 indicator lights up.

DIGITAL 2 IN: Select this to record the digital input from the digital source component connected to the DIGITAL IN 2 optical jack. The DIGITAL 2 indicator lights up.

ANALOG IN : Select this to record the analog input from the analog source component (cassette deck, tuner, etc.) connected to the ANALOG IN (REC jacks).

4Play the source to be recorded.

The level indicators show the input levels.

•The input level should be adjusted when the analog input is recorded (see “To adjust the analog input level” below).

•The input level for the digital inputs does not need adjustment.

•When DIGITAL 1 or DIGITAL 2 is selected, one of the sampling frequency indicators lights up. For example, 44.1kHz indicator is displayed for a CD player input.

However, if no source component is connected

to the digital input or the sampling frequency input is other than 32 kHz, 44.1 kHz, or 48 kHz, “DIGITAL IN UNLOCK” scrolls on the display showing that the recording is impossible.

5Press 6 on the main unit or 3 on the remote control unit.

Recording starts.

The 3 indicator lights up.

•When the MD becomes full, “UTOCwriting” is displayed indicating that the recording is successfully completed. Then, the MD stops. The disc indicator lights in green.

To stop recording:

Press 7 on the main unit or the remote control unit.

“UTOCwriting” is displayed and the MD stops. The disc indicator lights in green.

REC PAUSE

or

To pause the MD:

Press ¦ REC PAUSE on the main unit or the remote control unit.

To resume recording, press 6 on the main unit or 3on the remote control unit.

To adjust the analog input level ——————————

The input level should be adjusted before recording the analog input.

1In Rec/Pause mode, start playing the source for level adjustment. The level indicators show the input levels.

2 Turn the jog dial on the main unit to the right or left or press 4or ¢ on the remote control unit to increase or decrease the recording level.

or	As you adjust the recording level, “VOL. –10” will appear, for example. You can adjust
	the recording level between VOL.–50 and VOL.0 (–50 dB and 0 dB), or to VOL. – – –
	(below –50 dB).
	L
		40 30 20 15 10 6	3	0 dB
	R

15