Problems Possible cause You cannot link up, Base | BT 2300 manual

			Help	55


Problems	Possible cause

You cannot link up	Is the display flashing		? Check that the base is


with the base	connected to the mains power and switched on.
	Are you are out of range? Move the handset closer to
	the base.
	Are the batteries low or flat? If so, charge the batteries
	or replace them if necessary.
	If using more than one base, check that you are connected
	to the correct base, see page 53.

No ring on the handset	Check that the ringer volume is switched on, see page 43.
	Check that the base is plugged into the phone socket
	and that it is also connected to the mains power and
	switched on.

Buzzing noise on my radio, TV, computer or hearing aid

Sometimes, your BT Studio 2300 and other DECT GAP compatible handsets can interfere with other electrical equipment if placed too close. Try moving it at least one metre away from such appliances.

The charging does not	Check that the base is plugged into the mains socket
appear to be working	and switched on.

If you experience any problems, please call the Helpline on 0870 605 8047

Image 55

BT 2300 manual Problems Possible cause You cannot link up, Base, Or replace them if necessary, Charging does not

Contents

User Guide Section Welcome… BT Studio 2300 base BT Studio 2300 handset This guide This guide This guide Getting started Setting upLocation Talk/Standby time Getting started Your BT Studio 2300 is now ready for use Range indicator Your BT Studio 2300 multiple pack is now ready for use Handset buttons Getting to know your phone Base buttons and LEDs Getting to know your phone Getting to know your phone Handset display icons Getting to know your phone Menu map These are the options under each menu heading End a call Press Press or place the handset back on the base Using the phone Handsfree Redial Using the phoneSecrecy Press OFF to return to your caller PagingKeypad lock Internal calls Using the phone Press Int to end the internal call and return to your Caller on holdHandset user, then resume your external call Handset number you want Times for names beginning with S Press to dial Phonebook Edit name and number Phonebook Phonebook SMS text messaging Cost of the fixed line service Using SMSSMS text messaging Character map Writing tips You can send a message to an individual entry Using options Outbox Insert Symbol scroll to Insert Symbol then press Deleting Receiving and reading text messagesDelivery of SMS messages Press Back to return to the Inbox screen and to standby Delete scroll to Delete then press OK to delete the message These numbers have been pre-loaded into the BT Studio SMS settingsSMS Service Centre numbers Open Inbox from standby screen SMS text messaging User areas PIN protected Set personal user area Default settings for SMS text messaging Helping you manage your calls BT Calling FeaturesCaller Display Calls lists Phonebook BT Calling Features Redial Press OK Press Yes to delete or No to cancel For BT, call 0800 800 Call Diversion Reminder Call is a pay as you use service # 5 Handset settings Handset name Handset settings Handset ringer Volume Handset name Studio Base settings Handset priority When entering a PIN the digits are shown as asterisks Enter the current PIN Original setting 0000 and press OK Base settings To confirm Time settings Confirm Time settingsFor 2.30pm then press OK to Additional handsets and bases Additional handsets and bases Additional handsets and bases Help Or replace them if necessary Problems Possible cause You cannot link upAppear to be working Switched on Base Help Receive an incoming call Prefix Help 0870 605 Turns off the opt out optionThis means all incoming text is delivered as voice text Turns off permanent voice text message delivery General information Safety General information General information Guarantee General information Technical information Connecting to a switchboard Recall TTE Declaration of Conformance Ofﬁces worldwide