Access code and entering a pause
If you are connecting your BT Studio 2300 to a switchboard/PBX you may need to prefix
stored numbers with an access code (e.g. 9) in order to get an outside line. So that the
switchboard has time to pick up an outside line, you may also need to add a Pause after
the access code.
PABX access code
1. Press Menu then scroll to

Handeset

and press OK.
2. Scroll to

PABX access code

and press OK.
3. Display shows

Set Code

. Press OK.
4. Enter your PABX access code and press Save.
5. Scroll to

ON

and press OK.
6. Press and hold Back to return to standby.
Entering a pause
A pause is entered when storing a number in the phonebook (see page 22)or PABX access
code by pressing and holdingthe button until the display shows

P

.
Recall
The (Recall) button is used when connected to certain switchboards (PBXs) and with
some BT Calling Features, or equivalent services available via your Network Provider.
R
Vol
General information 65
BT Studio 2300 – Issue 2 – Edition 01 – 19.09.05 – 7087
If you experience any problems, please call the Helpline on 0870 605 8047