Chapter 20 Signaling Security (Access Control) Commands
256 Avaya M770 ATM Switch User’s Guide
Virtual Port’s Security Mode
Virtual port’s security mode
A vport can be either in a secured mode or unsecured mode. When a vport is in an
unsecured mode no access control is applied to call setups passing through it. When
a vport is secured every call setup passing through it is tested in terms of access
control.
Setting a vport to secured mode:
Setting a vport to unsecured mode:
Testing vport's Security configuration by simulation
The Signaling Security feature provides a handy utility for checking the vport's
security configuration by simulating call setups.
Command: M15-155s8:/> vport sig sigsecurity filter enable vport <vport>
Example: M15-155s8:/> vport sig sigsecurity filter enable vport 9.1.0
Parameters <vport> The filter’s vport
Command: M15-155s8:/> vport sig sigsecurity filter disable vport <vport>
Example: M15-155s8:/> vport sig sigsecurity filter disable vport 9.1.0
Parameters <vport> The filter’s vport
Command: M15-155s8:/> :/> vport sig sigsecurity filter simulate <vport>
<incoming|outgoing> <srcnsap> <dstnsap>
Example: M15-155s8:/> M15-155Fs9:/> vport sig sigsecurity filter
simulate 9.1.0 incoming
39.03.00.00.00.11.22.33.44.55.66.77.88.AA.BB.CC.DD.EE.FF.00
39.11.22.33.44.55.66.77.88.99.00.11.22.33.AA.AA.AA.AA.AA.00
Parameters <vport> The filter’s vport
<incoming|
outgoing> The filter’s direction (applicable to incoming or
outgoing calls)
<srcnsap> the simulated call setup source ATM address
<dstnsap> the simulated call setup destination ATM address
Output: Simulated call setup rejected.
Matching filter info summary:
Filter's priority: 6
Filter's template name: block-r&d
Filter's template src mask: 39.03.00.00.00.*
Filter's template dst mask: *
Filter's template action: deny